Machinery ,Steel Material ,Engineer spare parts
by Transposh - translation plugin for wordpress

regular plaster gypsum board

product show1

regular plaster gypsum board

Product description

Gypsum board, is often called drywall, wallboard, or plasterboard. It differs from other panel-type building products, such as plywood, hardboard, and fiberboard, because of its noncombustible core and paper facers. When joints and fastener heads are covered with a joint compound system, gypsum wall board creates a continuous surface suitable for most types of interior decoration.

Product show


























Name: Gypsum Board
Normal Size 1200mm × 2400mm / 1220mm × 2440mm
Length 2400mm / 2440mm / 3600mm / 3660mm
Width 1200mm / 1220mm
Thickness 7mm ~ 15.9mm
Edge QQ截图20160128143409


Regular Gypsum Board Standard Gypsum Board is mainly made from building gypsum withappropriate amount lightweight material, fiber reinforced material andadditives, and is sticked to the paper. It has fire resistance and soundinsulation function.Appearance: Ivory face,Gray back
Fire Resistant  Gypsum Board Fire Resistant Gypsum Board is mainly made from building gypsumwith appropriate amount lightweight material, inorganic fireproof fibermaterial and additives, and is sticked to the paper. It is the buildingmaterial which improves the binding force of the core. It has strongfire resistance when it is used as partition and ceiling.Appearance: Pink,
Moisture / Waterproof Gypsum Board Moisture Resistant Gypsum Board is mainly made from building gypsumwith appropriate amount fiber reinforced material and water–proofadditives, and is sticked to the paper. It is used in moist andsemi–exposed place, whose surface can be sticked with the tile.Appearance: Green












Ceiling System Proportion
Gypsum Board  1200×2400×9mm 1 m2
Main Runner 1 m
Cross Runner 3~3.6 m
Hanger 2~3 pcs
Main Runner Connector 0.5 pcs
Cross Runner Connector 1 pcs
Leveling 4~6 pcs
Sleeve Anchor 1 set
Cross Screw 1 set
Drywall Self Tapping Screw 25~30 pcs
Paper Joint Tape / Mesh Joint Tape 1.5~2 m
Partition System Proportion
Gypsum Board  1200×2400×12mm 2 m2
Metal Stud 2.2~3.6 m
Metal Track 0.7~1.4 m
Intermediate Channel 0.8~1.4 m
Support Card 4 pcs
Drywall Self Tapping Screw 25~30 pcs
Paper Joint Tape / Mesh Joint Tape 1.5~2 m














Product process

product process

















Main character

1.Environmental friendly

3.Strong nail holding power

4.Heat & sound insulation

5.Smoothness ceiling board

6.Light weight in unit acreage

7.Square Edge or Tapered edge ceiling board


  1. Standard Gypsum Board

Ceiling and drywall system, such as housing, hotel, theater, school, hospital etc.

  1. Fireproof Gypsum Board

It can be widely used in high fireproof requirement environment, such as hotel, hospital,

school, house and factory etc.

  1. Waterproof /Moisture proof Gypsum Board

It can be widely used in strong humidity environment, such as kitchen, bathroom, washroom

 and inner garage etc.


We recommend the use of lightweight metal PRANCE Acoustic‘C Studs.Using metal studs ensures accuracy, and they will not move or twist due to shrinkage or water ingress. In either case set studs at maximum 600mm centres.
2. Align the board
PRANCE Aquapanel Interior Gypsum Boards are laid horizontally.Start at one end and align the first board along the studs. Secure the board with PRANCE Aquapanel Maxi Screws (SN) at maximum 250mm centres, ensuring that the screws are at least 15mm from the board edge. Do not overdrive the screws.
3. Clean the adjacent board edges
In order to ensure that maximum adhesion is achieved when jointing, the adjacent edges of the fixed board and the next board in sequence must be cleaned. Simply clean the edges with a wet brush to remove traces of dust – the edges do not need to be soaked
4. Apply PRANCE gypsum board      Using a suitable gun, apply a continuous bead of Knauf Interior.Aquapanel Joint Adhesive to the adjacent edge of the fixed board(s). The bead should be of sufficient size to fill the joint fully when the next board is offered up.  4
5. Place the next board
Align the next board and push it firmly into the bed of adhesive.
The gap between boards should be less than 1mm. Secure the
board with PRANCE Aquapanel Maxi Screws (SN).
6. Scrape off the excess adhesive
Scrape off the excess PRANCE Aquapanel Interior Joint Adhesive the
next day using a flexible steel scraper



































Packing and loading

packing and loading
















Have any question, Please enter the form below and click the submit button.

5 + 8 = ?
Please enter the answer to the sum & Click Submit to verify your registration.

Related Items

  • Product Categories

  • Contact Us

    Deyang Sunrise International Co.,Ltd

    24 hours every day
    7 days every week